Stupid rspamd default config on my server blocked an email confirming an order from rayban I guess because it was the first time it saw an email from them? Couldn’t even release it, which annoyed me greatly.
And it also put a confirmation from a hotel into quarantine because the resort didn’t have a valid spf record. But at least I could release that one.
I ended up making it much more permissive as a result. But it was super annoying.
Fucking tech solutions to a manager problem. The manager should care about the metrics of wait time and client satisfaction.
If waits are low and satisfaction is high. Then who gives fuck all about what techs do in between calls.
Metrics like calls per tech or average length of calls could be used to better understand tech efficiency. Or even rings before pickup. A good pbx can help ensure calls are relatively equally spread between techs. This helps keep one tech from over working for another slacking off. You can have utilization goals so that you aren’t under or over staffed (I’m of the opinion that a techs utilization should be roughly 75-80% and they should have downtime in their shifts to prevent burnout.)
It’s stupid, inhumane, and impossible to expect an employee to track, bill, and work 100% of their shift.
I learned nginx when I was hosting websites. I had it set up and running when it was time to add reverse proxies into my setup. It didn’t take much more from the virtual hosts I was already using.
Now, I don’t host many individual sites anymore and haproxy has a plugin on my firewall for the handful of services I run now.
I’ve used all these sites before for used parts/servers
You can get an older model Samsung Evo 1tb SSD new for under $100. Those have been good drives for me.
You can probably find something to shuck used if you don’t care too much for reliability.
Regardless, get a second disk even something attached to your main PC to handle backups.
RPi are nice, but imo are getting expensive and if you aren’t using the i/o pins just not worth it. If I were to just start out again I’d pickup a used laptop. Higher specs than a RPi and built in battery backup.
Yup. I run those kind of clusters. But unless your in home datacenter territory, that sort of config isn’t likely to happen in self hosted.
Even physical hardware, if your paying power you can have clusters of physical hardware power up and down based on usage. There is no point in having 10 physical hosts running when the workload for n+1 means 3 servers overnight. With bnc, ipmi, ilo, idrac it will power them up as needed.
Most power line adaptors say to keep it on the same circuit. The one I have is running a small VoIP phone and I don’t have issues with call quality.
$10-15 will get you an outlet tester at just about every home improvement store. You plug it in and the three big LEDs light up and you compare it with the sticker on the device. Get one with a GFCI tester built in, when you press the button it will short to ground and if your receptacle has GFCI protection or is on a GFCI protected circuit should trip the GFCI protection.
Why would we need open source instead of just removing drm?
Most people aren’t going to compile old games for new hardware. That’s not an easy task.
Abandonware is a thing, and there are some websites dedicated to it. GOG has done some great stuff releasing drm free games. So long as we have drm free, we can always build emulators to run what can’t natively run on modern systems.
I work IT for my day job managing a datacenter and cloud infrastructure.
I host mostly Plex, home assistant, and immich. Immich has its data backed up, I don’t care about Plex data. If it all dies, so be it.
I have a server coloed that houses some websites and email, plus some random other things I’ve setup and tested. It’s got backups, and downtime is fine.
If my self hosted stuff dies, it doesn’t matter. Nothing in my life ultimately relies on it.
I wouldn’t, you’ll lose a lot not having it manage the disks such as using dissimilar disks for the array and having it spin down unused disks. You might be able to pass disks through so the unraid VM can manage them directly, but it might be harder than I’d personally want to deal with.
If you aren’t running VMs much. Truenas scale I believe can do docker well. I’ve seen a lot of people put that in a VM on proxmox with disks passed through to be used as the NAS portion.
Plex data, pi hole, and home assistant don’t contain anything meaningful. No credentials are stored in a form that can be reused.
The most sensitive is immich, which I’m more concerned about backups than I am someone might steal my nudes. Their online anyway.
Email is hosted off-site and I still have physical files for a lot of my documents. If someone stole hdds out of my server, they’d get a lot of Linux isos, pictures of cars, porn, tons of versioned software and games installers, etc.
Maybe my definition of sensitive is different than yours though.
Nope. This isn’t part of my threat model.
I don’t have sensitive data and stealing a drive would be inconvenient for a thief.
So many people didn’t read the post and going off how raid isn’t backup.
There are a few things to consider. How much data is it? How is it connected? How reliable do you want it to be? Where is it going to be? How are you backing it up? How will you monitor the disk(s) and backup process for failures?
Is it at some place that will be a pain to deal with if a hard drive dies, like a friend’s house or something. I’d deal with raid so it wouldn’t be an immediate reason to go fix it or go without backups.
Is it small enough amounts of data that you could have a complete third copy if you didn’t put the disks in raid? Then I’d probably make multiple copies and not use raid.
Are you dealing with something like veeam doing backup chains? Having an initial copy and then incremental with changes where you can go back to different days? Go with raid because having to reconfigure can be a hassle or having a full and incremental across jbods could cost you all the backups if the disk with the full backup is lost.
Either or is a valid choice and depends on your particular needs.
It has parity disks, which always need to be the largest disks in your array. You can run with either a single one double parity disk.
It seems to work well, as that’s how I’ve had to replace a dozen disks in the last year upgrading from 8tb disks to 18 or 22tb disks.
Since you are talking mismatched disks, I have gone to unraid after running a ceph cluster. I found it easy to keep adding and upgrading disks in unraid where it made more sense than maintaining or adding nodes. While I like the concept of being able to add nodes for very large storage arrays. My current unraid server is 180tb.
It is super simple to add/upgrade the storage one disk at a time.
Regrettably, there is currently no substitute product offered.
I really don’t think you regret a God damn thing broadcom.
As you’ve found, proxmox isnt an application that runs on windows or Linux. It’s an OS that you can install. And yes, you can configure bit to auto start the VMs when the machine boots.
It’s designed to run headless, so you’ll do all your configurations from a web browser. If you want to go crazy, I’m sure that raspberry pi can be configured as KVM for it (though piKVM is a bit of extra hardware.)
If you have something like tailscale or wireguard to a machine in the house, you can easily reach the web gui from any other machine on the VPN network and reboot the VMs that way.
You can even build monitoring that reboots the pihole VM of it stops responding to DNS queries.
On her computer, why not just use Thunderbird on it? Or even outlook, or whatever she likes. She just needs to pick the software.
On her phone, or even yours, why the stuff with accessing Thunderbird through vnc. Just add the server to whatever mail app on your phones?
If you want a web based thing, roundcube or sogo. But Thunderbird is gonna suck the way you are trying to use it.