It’s usually considered a poor idea to use it also as an AP.

The location usually isn’t great for your WiFi and there are better tools for the job.

OpnSense would be the easiest way if you wanted to go. It’s still not easy, but the articles online should help you out.

First you’d need a machine. I’ve got an m920q I bought off eBay for $135 after shipping.

The computer will likely only have one Ethernet port. And it’s likely the port is Realtek which isn’t supported well.

So, you’ll need to get yourself a NIC (a fancy term for a network card). There are good forum posts and articles online about the best NICs to buy for your needs. Intel is a must. However, you can find many of their NICs online labeled as another brand - usually HP, Lenovo, or Dell. Again, the forum posts will tell you what to look for.

If you bought the same computer I mentioned above, you’ll also need a riser and a bezel. Amazon and eBay will have a good selection.

Now assemble it. Flash the computer with OpnSense. Don’t plug it in as your router yet. Follow along with some basic setup guides online to figure out how you want it configured.

Once you’re happy, plug it in as your router and test that it works. If not, you’ll need to put your old router back in place until you can figure out what you need to change.

For NASA, similar desk layout, but it does look more modernized.

https://images-assets.nasa.gov/image/KSC-20181107-PH_BOE01_0002/KSC-20181107-PH_BOE01_0002~large.jpg

Ctrl+Shift+V exists now which does the exact same thing.

Actually it’s a bit better. Excel always ignores alt codes for the first key press or two after switching windows.

On the flip side, there is VBA which practically enforces bad practices.

That makes sense, I mean your monitor can only fit like six lines of text.

They make it super easy to turn off catching and DNS proxy if you’re worried about that, too. And they at least make their goals clear.

They don’t provide free services out of the goodness of their hearts, but because some users will go back to their company and convince them to get their paid services.

It’s the same reason a lot of software is free for college students and educators.

The benefit of Wireguard is that if you screw it up, it just won’t work. It basically enforces security.

Well, unless you tried to use the original PFSense module.

That’s Sctooblerr. Scrooblarr is completely unrelated.

Oh hey, they have an example.app.json file. Let’s check that out!

{}

It’s a great little machine. The downside, though, is that it’s not that powerful at all. With hardware offload enabled and features like QoS turned off, you’ll get about ~600mbps of max total bandwidth shared between up/down.

For most people that shouldn’t be an issue, though.

You could also use OpnSense and install AdGuard Home on that.