My internet connection is getting upgraded to 10 Gbit next week. I’m going to start out with the rental router from the ISP, but my goal is to replace it with a home-built router since I host a bunch of stuff and want to separate my out home Wi-Fi, etc onto VLANs. I’m currently using the good old Ubiquiti USG4. I don’t need anything fancy like high-speed VPN tunnels (just enough to run SSH though), just routing IPv6 and IPv4 tunneling (MAP-E with a static IP) as the new connection is IPv6 native.

After doing a bit of research the Lenovo ThinkCenter M720q has caught my eye. There are tons of them available locally and people online seem to have good luck using them for router duties.

The one thing I have not figured out is what CPU option I should go for? There’s the Celeron G4900T (2 core), Core i3 8100T (4 core), and Core i5 (6 core). The former two are pretty close in price but the latter costs twice as much as anything else.

Doing research I get really conflicting results, with half of people saying that just routing IP even 10 Gbit is a piece of cake for any decently modern CPU and others saying they experienced bottlenecks.

I’ve also seen comments mentioning that the BSD-based routing platforms like pfSense are worse for performance than Linux-based ones like OpenWRT due to the lack of multi-threading in the former, I don’t know if this is true.

Does anyone here have any experience routing 10 Gbit on commodity hardware and can share their experiences?

  • sugar_in_your_tea@sh.itjust.worksEnglish
    3·
    20 days ago

    Switches and routers are pretty low-power, so we could probably get away with some form of body heat -> electricity thing. Or a battery and put the horse on a treadmill every so often.

    • LifeInMultipleChoice@lemmy.worldEnglish
      3·
      19 days ago

      So we built big tanks with a lever system like a piston on your car. Fill the left piston with water. With a small hole in the middle. For flow. If you do the math right you get the horse to walk up the stairs and stand on that piston(header really) the water drops slowly all day forced out of the hole spinning a turbine translating to electricity, preferably a battery. Horse never has to go down stairs thankfully, just back up the stairs to the other side. Moving from one side~ 3 meters every 12 hours should do it.

      Basically, horse bed one side. Horse day lounge area other

    • eleitl@lemm.eeEnglish
      1·
      18 days ago

      Neither 10G multiport routers nor L3 wirespeed switches are low power. We’re looking at 100+ W to multiple hundred watts. In 1U these are rather screamy.